|
Hope you feel better soon, Tom!
I got a flu shot today, and now feel sick. I am sorry, after all that, that I probably won’t be well enough to come. But next year
Thomas J
|
|
|
Tom Johnston
I got a flu shot today, and now feel sick. I am sorry, after all that, that I probably won’t be well enough to come. But next year
Thomas J
|
|
|
I might wear a costume-hoodie. Maybe not a Star Wars one, given the 501st will be there. It has a tendency to get hot in the museum (by my body thermostat, anyway) and I've suffered in a costume there before.
On Fri, Oct 28, 2022 at 2:33 PM Matthew David Taylor < Mdtvandy@...> wrote: I'm planning on wearing an Indiana Jones costume.
I thought we were planning on doing Star Trek at one point, but I don't think that ever got figured out.
See you all tomorrow. Is anyone dressing in costume for this?
Air and Scare Attendees:
I have the arrival/parking/etc info from the museum. Please see below. Note, our area is inside. If you're bringing kids, and did not get tickets for them, it sounds like they'll be able to do the inside the museum activities, but not outdoor.
We are allowed to enter and setup as early as 8am. I plan to arrive between 9 and 9:30, as I have a long drive to get there. I'm just bringing a few small things to fill gaps in the display.
The "Brick pit" area for the play brick is marked as number one on the interior map. Our display area is number 2.
From the Museum:
> Here are some basics about arriving/parking and helping with the day.
>
> The event will take place inside and outside at Udvar-Hazy from 10 am – 3 pm on Saturday, October 29.
> Please dress appropriately for the weather, in case you are at an outside station.
> The outdoor event will be ticketed. Tickets are free, but online reservations were required (all tickets have been reserved at this time). Indoor activities and touring the Museum do not require tickets.
> The event will take place rain or shine, though some outdoor events may be curtailed due to rain.
> All volunteers working the full event will get access to the volunteer lounge which will have hotdogs, pizza, and salad. Those of you working the full event will be assigned a time for your lunch break.
>
>
> Arrival/Parking Info
>
> Attached are instructions to the Museum’s Route 50 entrance and a map with directions for the volunteer parking location. There will also be parking lot attendants on site to assist you.
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
I'm planning on wearing an Indiana Jones costume.
I thought we were planning on doing Star Trek at one point, but I don't think that ever got figured out.
See you all tomorrow. Is anyone dressing in costume for this?
Air and Scare Attendees:
I have the arrival/parking/etc info from the museum. Please see below. Note, our area is inside. If you're bringing kids, and did not get tickets for them, it sounds like they'll be able to do the inside the museum activities, but not outdoor.
We are allowed to enter and setup as early as 8am. I plan to arrive between 9 and 9:30, as I have a long drive to get there. I'm just bringing a few small things to fill gaps in the display.
The "Brick pit" area for the play brick is marked as number one on the interior map. Our display area is number 2.
From the Museum:
> Here are some basics about arriving/parking and helping with the day.
>
> The event will take place inside and outside at Udvar-Hazy from 10 am – 3 pm on Saturday, October 29.
> Please dress appropriately for the weather, in case you are at an outside station.
> The outdoor event will be ticketed. Tickets are free, but online reservations were required (all tickets have been reserved at this time). Indoor activities and touring the Museum do not require tickets.
> The event will take place rain or shine, though some outdoor events may be curtailed due to rain.
> All volunteers working the full event will get access to the volunteer lounge which will have hotdogs, pizza, and salad. Those of you working the full event will be assigned a time for your lunch break.
>
>
> Arrival/Parking Info
>
> Attached are instructions to the Museum’s Route 50 entrance and a map with directions for the volunteer parking location. There will also be parking lot attendants on site to assist you.
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
See you all tomorrow. Is anyone dressing in costume for this?
toggle quoted message
Show quoted text
From: Wamalug@Wamalug.groups.io <Wamalug@Wamalug.groups.io> on behalf of Daniel Rubin <happyweasel@...>
Sent: Tuesday, October 25, 2022 10:19 PM
To: Wamalug@wamalug.groups.io <Wamalug@wamalug.groups.io>
Subject: Re: [WamalugPublic] NASM Air and Scare 2022
Air and Scare Attendees:
I have the arrival/parking/etc info from the museum. Please see below. Note, our area is inside. If you're bringing kids, and did not get tickets for them, it sounds like they'll be able to do the inside the museum activities, but not outdoor.
We are allowed to enter and setup as early as 8am. I plan to arrive between 9 and 9:30, as I have a long drive to get there. I'm just bringing a few small things to fill gaps in the display.
The "Brick pit" area for the play brick is marked as number one on the interior map. Our display area is number 2.
From the Museum:
> Here are some basics about arriving/parking and helping with the day.
>
> The event will take place inside and outside at Udvar-Hazy from 10 am – 3 pm on Saturday, October 29.
> Please dress appropriately for the weather, in case you are at an outside station.
> The outdoor event will be ticketed. Tickets are free, but online reservations were required (all tickets have been reserved at this time). Indoor activities and touring the Museum do not require tickets.
> The event will take place rain or shine, though some outdoor events may be curtailed due to rain.
> All volunteers working the full event will get access to the volunteer lounge which will have hotdogs, pizza, and salad. Those of you working the full event will be assigned a time for your lunch break.
>
>
> Arrival/Parking Info
>
> Attached are instructions to the Museum’s Route 50 entrance and a map with directions for the volunteer parking location. There will also be parking lot attendants on site to assist you.
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
Tom Johnston
My humble thanks. I am only bringing one building and a 32x32 baseplate. One can go behind the other.
Thomas J
|
|
|
Hi Tom,
I was able to get you added to the volunteer list for the museum, so you'll be able to enter and help out. From what others have said they're bringing, I expect our space to be very tight, but hopefully we'll be able to squeeze a little of your stuff into the display. More eyes on the play brick is also always a help, so I'm glad we'll have you.
It is definitely too late to get more display space at the museum, and we are looking likely to be tight on space. I'm not sure if it's too late to add you to the list to get in the museum back entrance/parking, but I will ask.
Can I still come and participate? I only plan to bring as much as would fit in front of my chair.
Thomas J
|
|
|
It is definitely too late to get more display space at the museum, and we are looking likely to be tight on space. I'm not sure if it's too late to add you to the list to get in the museum back entrance/parking, but I will ask.
Can I still come and participate? I only plan to bring as much as would fit in front of my chair.
Thomas J
|
|
|
Air and Scare Attendees:
I have the arrival/parking/etc info from the museum. Please see below. Note, our area is inside. If you're bringing kids, and did not get tickets for them, it sounds like they'll be able to do the inside the museum activities, but not outdoor. We are allowed to enter and setup as early as 8am. I plan to arrive between 9 and 9:30, as I have a long drive to get there. I'm just bringing a few small things to fill gaps in the display. The "Brick pit" area for the play brick is marked as number one on the interior map. Our display area is number 2.  From the Museum: > Here are some basics about arriving/parking and helping with the day. > > The event will take place inside and outside at Udvar-Hazy from 10 am – 3 pm on Saturday, October 29. > Please dress appropriately for the weather, in case you are at an outside station. > The outdoor event will be ticketed. Tickets are free, but online reservations were required (all tickets have been reserved at this time). Indoor activities and touring the Museum do not require tickets. > The event will take place rain or shine, though some outdoor events may be curtailed due to rain. > All volunteers working the full event will get access to the volunteer lounge which will have hotdogs, pizza, and salad. Those of you working the full event will be assigned a time for your lunch break. > > > Arrival/Parking Info > > Attached are instructions to the Museum’s Route 50 entrance and a map with directions for the volunteer parking location. There will also be parking lot attendants on site to assist you.
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm. We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too). The museum also requests that we bring back the brick pit. Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me know, and let me know if you can bring it to the event. Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info. Thanks!
|
|
|
Tom Johnston
Can I still come and participate? I only plan to bring as much as would fit in front of my chair.
Thomas J
|
|
|
|
|
|
They said they're aiming for us to be inside, but hadn't finalized yet.
Will we be inside or outside?
I have you and Evan marked down as needing a table shared between you two.
I'm bringing my kids, they'll definitely be in costume. I'll probably be wearing a "costume" hoodie, until it gets hot and then it'll just be tshirt and regular pants.
I'll be bringing planes too - G.I.Joe/Cobra stuff. I had the impression that Evan and I were going to share a table, but we both need to leave a little early.
I can just display as many planes as we have space for.
Is everyone else dressing up, Halloween style?
Magnus
Will update. Hopefully it's doable. Thanks!
I think Magnus and I will need about a whole table, if possible
-Evan
I'm bringing my jack o lantern. It's about as big as a 48x48 baseplate.
Jason
Hi folks,
I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution.
Thanks!
|
Attendee |
MOCs |
Footprint |
|
Dan Rubin |
Various spaceships |
|
|
Jason Wolfson |
Play Brick |
|
|
Ralph |
Halloween GBC |
Half table |
|
Matthew Taylor |
Historic USAF plane models
|
|
|
Charlie Stevens |
|
|
|
Paul Neureiter |
Moonbase |
quarter table |
|
Evan M |
Military plane models |
Half table |
|
Magnus Lauglo |
joint with Evan |
|
|
Benjamin Paczak |
Sci fi spaceships |
quarter table |
|
Dene Quest |
Sci fi spaceships |
Half table |
|
Chelsy |
Mickey's Halloween Party |
Half table |
|
Norman Roldan |
|
|
|
Robert Gurskey |
Historic airplanes and some halloween models |
half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
Charlie Stephens
Will we be inside or outside?
toggle quoted message
Show quoted text
From: Wamalug@Wamalug.groups.io <Wamalug@Wamalug.groups.io> on behalf of Daniel Rubin <happyweasel@...>
Sent: Friday, October 14, 2022 5:48:04 PM
To: Wamalug@wamalug.groups.io <Wamalug@wamalug.groups.io>
Subject: Re: [WamalugPublic] NASM Air and Scare 2022
I have you and Evan marked down as needing a table shared between you two.
I'm bringing my kids, they'll definitely be in costume. I'll probably be wearing a "costume" hoodie, until it gets hot and then it'll just be tshirt and regular pants.
I'll be bringing planes too - G.I.Joe/Cobra stuff. I had the impression that Evan and I were going to share a table, but we both need to leave a little early.
I can just display as many planes as we have space for.
Is everyone else dressing up, Halloween style?
Magnus
Will update. Hopefully it's doable. Thanks!
I think Magnus and I will need about a whole table, if possible
-Evan
I'm bringing my jack o lantern. It's about as big as a 48x48 baseplate.
Jason
Hi folks,
I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution.
Thanks!
|
Attendee |
MOCs |
Footprint |
|
Dan Rubin |
Various spaceships |
|
|
Jason Wolfson |
Play Brick |
|
|
Ralph |
Halloween GBC |
Half table |
|
Matthew Taylor |
Historic USAF plane models
|
|
|
Charlie Stevens |
|
|
|
Paul Neureiter |
Moonbase |
quarter table |
|
Evan M |
Military plane models |
Half table |
|
Magnus Lauglo |
joint with Evan |
|
|
Benjamin Paczak |
Sci fi spaceships |
quarter table |
|
Dene Quest |
Sci fi spaceships |
Half table |
|
Chelsy |
Mickey's Halloween Party |
Half table |
|
Norman Roldan |
|
|
|
Robert Gurskey |
Historic airplanes and some halloween models |
half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
I have you and Evan marked down as needing a table shared between you two.
I'm bringing my kids, they'll definitely be in costume. I'll probably be wearing a "costume" hoodie, until it gets hot and then it'll just be tshirt and regular pants.
I'll be bringing planes too - G.I.Joe/Cobra stuff. I had the impression that Evan and I were going to share a table, but we both need to leave a little early.
I can just display as many planes as we have space for.
Is everyone else dressing up, Halloween style?
Magnus
Will update. Hopefully it's doable. Thanks!
I think Magnus and I will need about a whole table, if possible
-Evan
I'm bringing my jack o lantern. It's about as big as a 48x48 baseplate.
Jason
Hi folks,
I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution.
Thanks!
|
Attendee |
MOCs |
Footprint |
|
Dan Rubin |
Various spaceships |
|
|
Jason Wolfson |
Play Brick |
|
|
Ralph |
Halloween GBC |
Half table |
|
Matthew Taylor |
Historic USAF plane models
|
|
|
Charlie Stevens |
|
|
|
Paul Neureiter |
Moonbase |
quarter table |
|
Evan M |
Military plane models |
Half table |
|
Magnus Lauglo |
joint with Evan |
|
|
Benjamin Paczak |
Sci fi spaceships |
quarter table |
|
Dene Quest |
Sci fi spaceships |
Half table |
|
Chelsy |
Mickey's Halloween Party |
Half table |
|
Norman Roldan |
|
|
|
Robert Gurskey |
Historic airplanes and some halloween models |
half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
I'll be bringing planes too - G.I.Joe/Cobra stuff. I had the impression that Evan and I were going to share a table, but we both need to leave a little early.
I can just display as many planes as we have space for.
Is everyone else dressing up, Halloween style?
Magnus
toggle quoted message
Show quoted text
From: Wamalug@Wamalug.groups.io <Wamalug@Wamalug.groups.io> on behalf of Daniel Rubin <happyweasel@...>
Sent: Friday, October 14, 2022 4:13 PM
To: Wamalug@wamalug.groups.io <Wamalug@wamalug.groups.io>
Subject: Re: [WamalugPublic] NASM Air and Scare 2022
Will update. Hopefully it's doable. Thanks!
I think Magnus and I will need about a whole table, if possible
-Evan
I'm bringing my jack o lantern. It's about as big as a 48x48 baseplate.
Jason
Hi folks,
I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution.
Thanks!
|
Attendee |
MOCs |
Footprint |
|
Dan Rubin |
Various spaceships |
|
|
Jason Wolfson |
Play Brick |
|
|
Ralph |
Halloween GBC |
Half table |
|
Matthew Taylor |
Historic USAF plane models
|
|
|
Charlie Stevens |
|
|
|
Paul Neureiter |
Moonbase |
quarter table |
|
Evan M |
Military plane models |
Half table |
|
Magnus Lauglo |
joint with Evan |
|
|
Benjamin Paczak |
Sci fi spaceships |
quarter table |
|
Dene Quest |
Sci fi spaceships |
Half table |
|
Chelsy |
Mickey's Halloween Party |
Half table |
|
Norman Roldan |
|
|
|
Robert Gurskey |
Historic airplanes and some halloween models |
half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
Will update. Hopefully it's doable. Thanks!
I think Magnus and I will need about a whole table, if possible
-Evan
I'm bringing my jack o lantern. It's about as big as a 48x48 baseplate.
Jason
Hi folks, I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution. Thanks! | Attendee | MOCs | Footprint | | Dan Rubin | Various spaceships | | | Jason Wolfson | Play Brick | | | Ralph | Halloween GBC | Half table | | Matthew Taylor | Historic USAF plane models | | | Charlie Stevens | | | | Paul Neureiter | Moonbase | quarter table | | Evan M | Military plane models | Half table | | Magnus Lauglo | joint with Evan | | | Benjamin Paczak | Sci fi spaceships | quarter table | | Dene Quest | Sci fi spaceships | Half table | | Chelsy | Mickey's Halloween Party | Half table | | Norman Roldan | | | | Robert Gurskey | Historic airplanes and some halloween models | half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm. We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too). The museum also requests that we bring back the brick pit. Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me know, and let me know if you can bring it to the event. Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info. Thanks!
|
|
|
I think Magnus and I will need about a whole table, if possible
-Evan
I'm bringing my jack o lantern. It's about as big as a 48x48 baseplate.
Jason
Hi folks, I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution. Thanks! | Attendee | MOCs | Footprint | | Dan Rubin | Various spaceships | | | Jason Wolfson | Play Brick | | | Ralph | Halloween GBC | Half table | | Matthew Taylor | Historic USAF plane models | | | Charlie Stevens | | | | Paul Neureiter | Moonbase | quarter table | | Evan M | Military plane models | Half table | | Magnus Lauglo | joint with Evan | | | Benjamin Paczak | Sci fi spaceships | quarter table | | Dene Quest | Sci fi spaceships | Half table | | Chelsy | Mickey's Halloween Party | Half table | | Norman Roldan | | | | Robert Gurskey | Historic airplanes and some halloween models | half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm. We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too). The museum also requests that we bring back the brick pit. Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me know, and let me know if you can bring it to the event. Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info. Thanks!
|
|
|
toggle quoted message
Show quoted text
My modules are separate, but we’ll likely be connecting. So a total of about 1.5 GBC tables all together
Is that GBC footprint overlapping with Ralph's GBC footprint, or completely separate?
You can count me in for 3/4 table of Halloween GBC and 1/4 table of old-fashioned plane models
Hi folks,
I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution.
Thanks!
|
Attendee |
MOCs |
Footprint |
|
Dan Rubin |
Various spaceships |
|
|
Jason Wolfson |
Play Brick |
|
|
Ralph |
Halloween GBC |
Half table |
|
Matthew Taylor |
Historic USAF plane models
|
|
|
Charlie Stevens |
|
|
|
Paul Neureiter |
Moonbase |
quarter table |
|
Evan M |
Military plane models |
Half table |
|
Magnus Lauglo |
joint with Evan |
|
|
Benjamin Paczak |
Sci fi spaceships |
quarter table |
|
Dene Quest |
Sci fi spaceships |
Half table |
|
Chelsy |
Mickey's Halloween Party |
Half table |
|
Norman Roldan |
|
|
|
Robert Gurskey |
Historic airplanes and some halloween models |
half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
Charlie Stephens
My modules are separate, but we’ll likely be connecting. So a total of about 1.5 GBC tables all together
toggle quoted message
Show quoted text
From: Wamalug@Wamalug.groups.io <Wamalug@Wamalug.groups.io> on behalf of Daniel Rubin <happyweasel@...>
Sent: Friday, October 14, 2022 3:21:21 PM
To: Wamalug@wamalug.groups.io <Wamalug@wamalug.groups.io>
Subject: Re: [WamalugPublic] NASM Air and Scare 2022
Is that GBC footprint overlapping with Ralph's GBC footprint, or completely separate?
You can count me in for 3/4 table of Halloween GBC and 1/4 table of old-fashioned plane models
Hi folks,
I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution.
Thanks!
|
Attendee |
MOCs |
Footprint |
|
Dan Rubin |
Various spaceships |
|
|
Jason Wolfson |
Play Brick |
|
|
Ralph |
Halloween GBC |
Half table |
|
Matthew Taylor |
Historic USAF plane models
|
|
|
Charlie Stevens |
|
|
|
Paul Neureiter |
Moonbase |
quarter table |
|
Evan M |
Military plane models |
Half table |
|
Magnus Lauglo |
joint with Evan |
|
|
Benjamin Paczak |
Sci fi spaceships |
quarter table |
|
Dene Quest |
Sci fi spaceships |
Half table |
|
Chelsy |
Mickey's Halloween Party |
Half table |
|
Norman Roldan |
|
|
|
Robert Gurskey |
Historic airplanes and some halloween models |
half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
Is that GBC footprint overlapping with Ralph's GBC footprint, or completely separate?
You can count me in for 3/4 table of Halloween GBC and 1/4 table of old-fashioned plane models
Hi folks,
I'm trying to pull together a full list of attendee/volunteers, what they're planning to bring, and their table space needs. This is merged between here and Discord. Please let me know if I've missed you, or gotten something wrong about your contribution.
Thanks!
|
Attendee |
MOCs |
Footprint |
|
Dan Rubin |
Various spaceships |
|
|
Jason Wolfson |
Play Brick |
|
|
Ralph |
Halloween GBC |
Half table |
|
Matthew Taylor |
Historic USAF plane models
|
|
|
Charlie Stevens |
|
|
|
Paul Neureiter |
Moonbase |
quarter table |
|
Evan M |
Military plane models |
Half table |
|
Magnus Lauglo |
joint with Evan |
|
|
Benjamin Paczak |
Sci fi spaceships |
quarter table |
|
Dene Quest |
Sci fi spaceships |
Half table |
|
Chelsy |
Mickey's Halloween Party |
Half table |
|
Norman Roldan |
|
|
|
Robert Gurskey |
Historic airplanes and some halloween models |
half table |
Hi folks!
We are go for Air and Scare again this year. It is Sat Oct 29. 10am – 3 pm.
We will be set up inside the museum this year (the event is hybrid indoor/outdoor). The museum requests that we limit our display models to halloween or museum related topics (basically what they said last year, too).
The museum also requests that we bring back the brick pit.
Please let me know if you plan to attend. If so, please let me know what you intend to display (approximately), about how much space it needs, and if you intend to stay for the full duration. Also, if you'll be attending and have club brick, please let me
know, and let me know if you can bring it to the event.
Related, the museum is also looking for volunteers to help out with various other activities that day. If anyone is interested in doing that, let me know, and I'll get you more info.
Thanks!
|
|
|
